Organic binder RB-ENDOKOM 950

Application examples:

– Production of multilayer heat-insulating composite materials with an endothermic ceramic matrix;
– Bonding of heat insulating composite materials;
– Can be used for connecting insulating composite materials with metal surfaces (stainless steel, galvanized metals).

Specifications:

Basis Alumophosphate matrix with homogenized inorganic endothermic additives and reinforcing additives based on nano silicon carbide
Colour In the dry state, light gray
Viscosity ~ 2 500 – 2 700 мPа*s at 200С
Density ~ 1.80 g/cм3 at 200С
Parameter pH ~ pH 11,5 – 11,7
Curing time ~ About 1,5 – 2 min. at Т=20оС and humidity 50%
Рекомендуемый слой нанесения при склеивании ~ 150 – 300 g/м2
Strength to flat compression 19,6 – 39,2 kPa
Heat resistance  Till 950оС
Temperature range of solidification From  +8оС at +110оС

 

Instructions for use:

1. Mix the binder until a homogeneous substance is obtained.
2. The surfaces of the blanks to be bonded must be dry and free of dust and grease.
3. The binder is evenly applied to the surface of the products to be glued using a spatula.
4. An important condition for gluing is the presence of open porosity on one of the surfaces to be joined.
5. When bonding to a metal surface, the binder should be applied first to the metal surface.

Compliance with safety rules when working with a binder:

1. Rinse the unfastened binder with warm water.
2. Use personal protective equipment: rubber gloves and respirator.
3. Do not allow the compound to enter upon open areas of the body.

Storage:

It is allowed to store in a sealed package in a dry room at temperatures from + 15 ° C to + 25 ° C. Avoid exposure to direct sunlight.

Packaging:
Packing in sealed plastic containers, net weight 15 kg.

Organic binder RB-ENDOKOM 950